Features:
Prevents loss of prime in water well, pool, spa and irrigation systems Acetal plastic
Non-conductive
Stainless steel spring "Buna-n" seal & removable polyethylene strainer
Not for gasoline systems

Spring-loaded poppet, O-ring seal, threaded ends comply to ANSI B1.20.1.
Stainless steel strainer and spring for corrosion resistance
Large flow area

VALVE FOOT SIMMONS 1

Features:
Corrosion-resistant body
Used with jet and centrifugal pumps to filter debris from lakes, wells, and ponds while keeping the pump primed
3165 stainless steel spring
Maximum temperature of 180 degrees F
Maximum PSI of 175
This 1-1/2" plastic foot valve can convert to a check valve by removing a screen. It works great for the suction side of any well or lawn pump. It is corrosion resistant for durability.

Foot Valve with Strainer, 1-1/2 in, FIP, Brass, Strainer Material:
Stainless steel strainger and spring for corrosion resistance
Spring loaded poppet
O-ring seal
Large flow area

VALVE FOOT SIMMONS 1 1/2

VALVE PRESS REDUCING 1-1/2 #23B

VALVE PRES REDUCING 2-1/2 #23B

The 1/2" 500XL Pressure Reducing Valve works effectively for industrial water lines and commercial irrigation systems with high-flow rate capacity and low falloff. The balanced piston design enables the regulator to respond seamlessly to changes in the system flow demand, ultimately providing vital protection from inlet pressure changes. The direct-acting integral bypass design prevents buildup of excessive system pressure caused by thermal expansion. The all-bronze body and threaded bell provide superior corrosion resistance and easy access to the internal system. You will save valuable installation time and labor costs.

Short lay length and compact design allow it to install in tight spaces
High-flow capacity suits commercial or industrial pressure reduction applications
Highly durable, threaded bell resists corrosion and provides easy access to cartridge internals
Lead-free
ASSEA(R) Listed
IAPMOA(R) Listed
CSAA(R) Certified
City of Los Angeles Approved
Meets the requirements of NSF/ANSI 61

Ideal for use where lead free valves are required. Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The high flow capacity makes this device most suitable for industrial water lines and commercial irrigation systems. The direct acting integral by-pass design prevents buildup of excessive system pressure caused by thermal expansion. The balanced piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes.

Features:
Maximum working water pressure 300 psi
Maximum working water temperature 180? F
Reduced pressure range 25 psi to 75 psi
All bronze body and bell housing provides durability

Ideal for use where Lead-Free valves are required. Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The high flow capacity makes this device most suitable for industrial water lines and commercial irrigation systems. The direct acting integral bypass design prevents buildup of excessive system pressure caused by thermal expansion. The balanced piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes.

Well suited for industrial or commercial applications
High flow rate with minimal fall-off
All bronze body and bell resist corrosion
Low-lead law compliant
Maximum working water pressure 300 psi
Maximum working water temperature 140A?F

ZURN PRESS REDUCING VALVE 1-1/4

The Zurn-Wilkins Model 500XL is the workhorse of the Wilkins pressure reducing valve line up. Exhibiting the highest flow rates of the entire Wilkins regulator line makes this device most suitable for industrial water lines and commercial irrigation systems. The low-lead law compliant valve is designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure.

Direct acting integral by-pass design prevents buildup of excessive system pressure caused by thermal expansion
Balanced piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes
All bronze body and bell resists corrosion
High flow rate with minimal fall-off
Valve may be installed in any position and is serviceable in-line
ASSE listed 1003, IAPMO listed, CSA certified, city of Los Angeles approved, NSF listed - standard 61, annex G

3/8" x 3/8", forged brass gas ball valve, flare x flare, 1 piece body, csa 3-88 certified, csa certified, chrome plated forged brass ball.

1/2" x 1/2", forged brass gas ball valve, flare x flare, 1 piece body, csa 3-88 certified, csa certified, chrome plated forged brass ball.